After reading through many build blogs, here is a list of the tools I already had and those I have just purchased ready to start.
As the build progresses I will add any other tools I need to the list

  • Trolley Jack 
  • Clamps (various)
  • Self grip pliers
  • Riveter 
  • Engine hoist (1 ton)
  • Cobalt drill bits 3.2mm, 4mm, 6mm & 9mm
  • Square 
  • Cleco pins 1/8 & pliers
  • Vernier calliper 
  • Auto punch
  • Hex Keys 
  • Torque Wrench 
  • Trestles 
  • Vice 
  • Rivnut tool 
  • Various socket sets
  • Various spanners
  • Bench Grinder
  • Tap & Die Set (incl 7/16th UNF for Seat belt mountings)
  • Barrel sander and emery paper
  • 1200 grade wet & dry, cutting paste and T-Cut (for nose cone repairs)
  • M18 x1.5 tap to clean the front wishbone ball joint threads
  • M14 x2 tap to clean the steering rack extension threads
  • Clutch alignment tool (although could have been done by hand/eye)
  • Dremel 4000 Rotary Tool Kit (4000-4/65)  - bought to cut the dash
  • Silverline Sander Polisher  polisher to buff up the aluminium

No comments:

Post a Comment